CASTING MACHINE
A Jewellery Casting Machine Helps Manufacturers Cast Jewellery And Metal Components With Precision And Consistency. The Paras Traders Offers Jewellery Casting Equipment That Supports Controlled Melting, Mould Filling, And Accurate Shape Formation. These Machines Help Achieve Detailed Designs, Consistent Casting Quality, And Efficient Production Across Different Jewellery Manufacturing Requirements
| Product Name: | Casting Machine |
|---|
| Product Name: | vulcanizer machine |
|---|---|
| Size | 6*8 |
| Power Supply | Single phase |
| Eletricity sonsumption | 1 K.W |
| body type | M.S Body |
| Weight | 35 Kg |
| Product Name: | Burnout Furnace M.S body With Pid Controller |
|---|---|
| Size | 10*10*12, 12*16*12, 16*16*12 |
| Power supply | Single phase |
| Electricity consumption | 4KW 6KW 6KW |
| Weight | 115Kg 140Kg 160Kg |
| Body Type | M.S/ M.S Body |
| PID Programmer | Yes |
| P. Wax Tray | Yes |
| Wire Element+ Use | Kathal Wire |
| Product Name: | 2 in 1 Vacuum casting machine |
|---|---|
| Size | 400Lpm 600Lpm 1000Lpm 63Lpm |
| Power Supply | Single phase Single Phase Three phase Three Phase |
| Investment | 11*11 11*11 11*11 |
| Champber | |
| Weight | 170Kg 200Kg 200Kg |
| Electricity | 2Kw 3Kw |
| Consumption | |
| Casting Chamber | 5*11 5*11 5*11 |
| Motor Size | 2Hp 3Hp |
| Body Type | 5.5, 5.5, 5.5 |
| Product Name: | Wax Injector Autoclamp T 4 |
|---|---|
| Size | 2 kg |
| Power Supply | Single phase |
| Weight | 30Kg |
| Electricity Consumption | 1 K.w |
| Body type | M.S Body |
| Parameter | Typical specification |
| Machine type | Automatic wax injector with hydraulic/pneumatic clamping |
| Application | Jewellery investment casting / lost-wax casting |
| Materials | Injection wax for gold, silver, platinum jewellery |
| Wax tank | Heated, temperature-controlled reservoir |
| Wax temperature | Typically adjustable around 60–90°C, depending on wax |
| Injection pressure | Adjustable; typically 2–8 bar depending on wax and pattern |
| Clamp | Automatic hydraulic/pneumatic mould clamping |
| Clamp force | Model dependent; commonly several hundred kgf to several tonnes |
| Mould | Rubber/silicone/metal jewellery moulds, depending on system |
| Injection nozzle | Heated/temperature-controlled nozzle |
| Vacuum | Optional/available on higher-end machines |
| Pressure control | Digital pressure regulator |
| Temperature control | Digital PID controller |
| Timer | Programmable injection/holding time |
| Air supply | Typically 5–8 bar compressed air |
| Electrical supply | Usually 220 V, 50 Hz, single phase |
| Heating | Electric cartridge/band heater |
| Control | Digital/PLC control |
| Safety | Emergency stop, over-temperature protection, pressure relief |
| Construction | Heavy-duty steel body |
| Application | Rings, pendants, earrings, chains, bracelets and other wax patterns |
